www.EnfoStuff.com Forum Index
Google
www.EnfoStuff.com
Forum for all North American English and European Ford Owners
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


Brett's 100e Anglia

 
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> Readers Rides
View previous topic :: View next topic  
Author Message
Brett Wilkie



Joined: 16 Sep 2012
Posts: 1081
Location: Vancouver British Columbia Canada

PostPosted: Sat Dec 03, 2016 1:41 pm    Post subject: Brett's 100e Anglia Reply with quote

I have most of the mechanical bits in the body shell now so I thought I would finally try and start my modified Anglia. The starter is slow at best but it was trying to go, I had to replace a condenser and charge up the battery a bit more and she sprung to life right away. The oily residue on the header and exhaust pipes certainly started to cook and smoke so bad I left the garage. Here is a clip of the first start. https://www.youtube.com/watch?v=fXnCkpsyyEI
_________________
Anglia 100e modified
Prefect 100e stock
Back to top
View user's profile Send private message
zephyrgary



Joined: 03 Aug 2007
Posts: 756
Location: cave creek,az

PostPosted: Sat Dec 03, 2016 2:26 pm    Post subject: Reply with quote

Nice job and very satisfying I should think. I thought we were going to go for a spin, then I saw you had a tad more work to do before that moment.
Cheers
Gary
_________________
the older i get,the faster i went...
Back to top
View user's profile Send private message
Brett Wilkie



Joined: 16 Sep 2012
Posts: 1081
Location: Vancouver British Columbia Canada

PostPosted: Sat Dec 03, 2016 10:22 pm    Post subject: Reply with quote

When you mention going for a spin, I was tempted to put the wheels on and take it for a short ride in the back lane. The car is mechanically fully functional but is lacking many body bits at the moment.
_________________
Anglia 100e modified
Prefect 100e stock
Back to top
View user's profile Send private message
Langlia



Joined: 14 Dec 2015
Posts: 334
Location: Langley BC

PostPosted: Sat Dec 03, 2016 10:27 pm    Post subject: Reply with quote

Dooooooo it
Back to top
View user's profile Send private message
Dave C



Joined: 24 Mar 2016
Posts: 75
Location: Pitt Meadows, B.C. Canada

PostPosted: Sun Dec 04, 2016 12:21 am    Post subject: Reply with quote

Nice!
Nothing like the sound of webers....(is it webers or webbers?)

Cheers,
Dave.
Back to top
View user's profile Send private message AIM Address
Brett Wilkie



Joined: 16 Sep 2012
Posts: 1081
Location: Vancouver British Columbia Canada

PostPosted: Sun Dec 04, 2016 1:44 am    Post subject: Reply with quote

Dave C wrote:
Nice!
Nothing like the sound of webers....(is it webers or webbers?)

Cheers,
Dave.

I guess it is Webers, I love the sound of them on full song. That's the hard part of running in a new engine on DCOEs, you just want to stand on it to hear them sing but you have to practice restraint.
_________________
Anglia 100e modified
Prefect 100e stock
Back to top
View user's profile Send private message
peteleo



Joined: 24 Aug 2008
Posts: 879
Location: San Mateo,California

PostPosted: Sun Dec 04, 2016 12:04 pm    Post subject: Reply with quote

Perfect combination 107E c/m and Kent engine. I see you're using a Cortina MK1 c/mc. Because of a h/d clutch ? Looking forward to final completion. Pete
Back to top
View user's profile Send private message Send e-mail
Brett Wilkie



Joined: 16 Sep 2012
Posts: 1081
Location: Vancouver British Columbia Canada

PostPosted: Sun Dec 04, 2016 1:06 pm    Post subject: Reply with quote

I used the Cortina Mk1 .700 brake master as my clutch MC because I had one on the shelf and I needed a .700, the stock .622 Anglia MC was slightly too small to fully release the clutch. I am using a stock Cortina Mk2 GT clutch with itís larger clutch slave cylinder. I also found the 100e spacing of the brake and clutch MCs too close for the larger reservoir of the Cortina C/MC so I installed a Wilwood brake master with a remote reservoir. The 2000e gearbox and bell housing are Cortina Mk2 GT but I swapped in a non-GT tail housing, shift rods and 105e shift lever, I also loaded the box with this quaife gear set.
For my own personal taste I find this puts the shifter in a desirable position without conflicting with the hand brake lever. Here is the final position of the shifter and pics of the gearbox and hydraulics.





_________________
Anglia 100e modified
Prefect 100e stock
Back to top
View user's profile Send private message
Kiwi Cortina



Joined: 20 Dec 2011
Posts: 273
Location: Novato Ca

PostPosted: Sun Dec 04, 2016 1:55 pm    Post subject: Reply with quote

Very cool Brett
Back to top
View user's profile Send private message
Langlia



Joined: 14 Dec 2015
Posts: 334
Location: Langley BC

PostPosted: Sun Dec 04, 2016 2:07 pm    Post subject: Reply with quote

What's the story with that green one?

The man I bought my crossflow from in Port Alberni had an identical one with an RX7 motor.

Keep up the good work! Maybe I'll see this thing in person one day.
Back to top
View user's profile Send private message
zephyrgary



Joined: 03 Aug 2007
Posts: 756
Location: cave creek,az

PostPosted: Sun Dec 04, 2016 2:47 pm    Post subject: Reply with quote

I just read that Jenvey make a fuel injection system that looks exactly like twin Webers. I agree about the sound. I miss the triple carb wail from my old MK1...


http://www.jenvey.co.uk/
_________________
the older i get,the faster i went...
Back to top
View user's profile Send private message
Brett Wilkie



Joined: 16 Sep 2012
Posts: 1081
Location: Vancouver British Columbia Canada

PostPosted: Sun Dec 04, 2016 4:19 pm    Post subject: Reply with quote

Langlia wrote:
What's the story with that green one?

The man I bought my crossflow from in Port Alberni had an identical one with an RX7 motor.

Keep up the good work! Maybe I'll see this thing in person one day.


The green one is a bone stock 1958 Anglia, I bought that about 3 years ago


I think this might be the one you are thinking of on the Island, I have never seen it in the flesh but it is Rotary powered.


_________________
Anglia 100e modified
Prefect 100e stock
Back to top
View user's profile Send private message
Brett Wilkie



Joined: 16 Sep 2012
Posts: 1081
Location: Vancouver British Columbia Canada

PostPosted: Sun Dec 04, 2016 4:21 pm    Post subject: Reply with quote

zephyrgary wrote:
I just read that Jenvey make a fuel injection system that looks exactly like twin Webers. I agree about the sound. I miss the triple carb wail from my old MK1...
That would be a neat setup but $$$


http://www.jenvey.co.uk/

_________________
Anglia 100e modified
Prefect 100e stock
Back to top
View user's profile Send private message
Langlia



Joined: 14 Dec 2015
Posts: 334
Location: Langley BC

PostPosted: Sun Dec 04, 2016 7:03 pm    Post subject: Reply with quote

Brett Wilkie wrote:
Langlia wrote:
What's the story with that green one?

The man I bought my crossflow from in Port Alberni had an identical one with an RX7 motor.

Keep up the good work! Maybe I'll see this thing in person one day.


The green one is a bone stock 1958 Anglia, I bought that about 3 years ago


I think this might be the one you are thinking of on the Island, I have never seen it in the flesh but it is Rotary powered.



Yes that'll be the one!

I like your green one alot Very Happy
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> Readers Rides All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group