www.EnfoStuff.com

reggie · Joined: 20 Oct 2007 Posts: 232

Need a good condition trunk handle with key. Thx reggie
_________________
"god made Adam & Eve for a reason"

peteleo · Posted: Tue Feb 28, 2017 10:29 am Post subject:

Reggie,

It's in good condition. I would need to remove the barrel to make a key. Pete

reggie · Joined: 20 Oct 2007 Posts: 232

I am interested .my one is pitted and nevr was able to lock.
_________________
"god made Adam & Eve for a reason"

peteleo · Posted: Sat Mar 04, 2017 11:49 pm Post subject:

I can remove the barrel so you can use your original barrel and key. Oil the barrel tumblers before inserting back in the cylinder. I will sell just the handle without the bezel, key barrel, and square extension shaft. Pete

reggie · Joined: 20 Oct 2007 Posts: 232

Let me hold on for a minute I will try to find one that is complete because mine the key was not working also. Do you know if the mg part is the same.
_________________
"god made Adam & Eve for a reason"

peteleo · Posted: Sun Mar 05, 2017 11:02 pm Post subject:

MG trunk handle barrel maybe the same as the Anglia 100E / 105E.
Lucas supplied the barrels and keys for BMC and EnFo.
Pete Groh can make a key for you by giving him the # printed on the barrel.

http://www.britishcarkeys.com/original/

here's were the #s are located; http://www.triple-c.com/How_to_find_your_cars_lock_or_key_code.cfm

Anglia came with two types of trunk handle barrels:

reggie · Joined: 20 Oct 2007 Posts: 232

I am heading to the mg swap meet sunday 18th of march here in chicago . i will see what anglia parts i can pick up.
_________________
"god made Adam & Eve for a reason"