| View previous topic :: View next topic |
| Author |
Message |
Brett Wilkie
Joined: 16 Sep 2012
Posts: 1268
Location: Vancouver British Columbia Canada
|
 Posted: Sun Aug 27, 2017 8:10 pm Post subject: |
 |
|
The car is coming along nicely, I wish that I had mine at the painting stage. I am curious, it looks like you are using copper for your brake lines?? Is that an approved type of line here in Canada? When I used to do vehicle inspections copper lines were a failing point??
_________________
Anglia 100e modified
Prefect 100e stock |
|
| Back to top |
|
 |
Langlia
Joined: 14 Dec 2015
Posts: 490
Location: Langley BC
|
| Posted: Mon Aug 28, 2017 8:03 am Post subject: |
|
|
| It's a copper nickel brake tube |
|
| Back to top |
|
|
Langlia
Joined: 14 Dec 2015
Posts: 490
Location: Langley BC
|
| Posted: Mon Aug 28, 2017 9:17 am Post subject: |
|
|
| What stage is your car at right now? I think my next car I'll take in for a paint job. Too tedious, at least now I can say that I can do it. |
|
| Back to top |
|
|
Brett Wilkie
Joined: 16 Sep 2012
Posts: 1268
Location: Vancouver British Columbia Canada
|
| Posted: Mon Aug 28, 2017 11:46 am Post subject: |
|
|
| Langlia wrote: | | What stage is your car at right now? I think my next car I'll take in for a paint job. Too tedious, at least now I can say that I can do it. |
My three 100e cars have been put on hold since last December. I sold my house in Vancouver and have been concentrating on the move and building a garage here on the Sunshine Coast, I had to rent back my Vancouver garage for six months to allow me time to build the new garage here. I drove my stock Anglia here but had to flat deck the other two, that was a bunch of bucks for that job. Here they are in their old home and new.
_________________
Anglia 100e modified
Prefect 100e stock |
|
| Back to top |
|
|
Langlia
Joined: 14 Dec 2015
Posts: 490
Location: Langley BC
|
| Posted: Mon Aug 28, 2017 5:44 pm Post subject: |
|
|
Looking good.
I saw your car at Van Dusen, you were not to be seen otherwise I would have said hi.
Thinking about getting a lift into your new garage? |
|
| Back to top |
|
|
Brett Wilkie
Joined: 16 Sep 2012
Posts: 1268
Location: Vancouver British Columbia Canada
|
| Posted: Mon Aug 28, 2017 9:59 pm Post subject: |
|
|
| Langlia wrote: | Looking good.
I saw your car at Van Dusen, you were not to be seen otherwise I would have said hi.
Thinking about getting a lift into your new garage? |
VanDusen was good but you are correct about my absence, I was out and about in the field for most of the event as there were a lot of friends to visit.
Regarding the garage, I very briefly thought about a lift but could not justify having it for the amount of time I might use it, My wife wanted to keep a low profile on the building height and I wanted to fully insulate the garage so that too would limit severely how high you could put a car to the point of being not possible.
I did though last week finally get my compressor wired in, I was waiting for the electrician for a while there.
The garage has only an 8 foot ceiling but it is well lit and heated so it will allow me to hopefully make progress on my car over the Winter.
_________________
Anglia 100e modified
Prefect 100e stock |
|
| Back to top |
|
|
Langlia
Joined: 14 Dec 2015
Posts: 490
Location: Langley BC
|
| Posted: Wed Aug 30, 2017 9:41 am Post subject: |
|
|
Fair enough, I remember buying a plasma cutter, used it a few times.. just one of those things eh.
I remember seeing something about a portable lift. Runs off your compressor, you have the mounts on the ground, and you just wheel them over when and if you need to use it. Enough to get it off the ground. I don't like putting my stuff up very high unless I know it's never gonna fall..
Compressor looks very nice, is your house already built? |
|
| Back to top |
|
|
Brett Wilkie
Joined: 16 Sep 2012
Posts: 1268
Location: Vancouver British Columbia Canada
|
| Posted: Wed Aug 30, 2017 12:24 pm Post subject: |
|
|
You gotta have a few tool/toys, the compressor will be useful for me though as I still have some air driven hand tools left from my working days. I bought this one as it has over 10CFM flow rate and that would work well if I ever decide to try painting?
I am only building the garage, I have had two houses here on the Sunshine Coast since 2001, one has always been my Coast residence and the other a revenue generator. When I sold my Vancouver house I had to put a garage in up here to replace the "Man Cave" I lost in the Vancouver sale.
_________________
Anglia 100e modified
Prefect 100e stock |
|
| Back to top |
|
|
Langlia
Joined: 14 Dec 2015
Posts: 490
Location: Langley BC
|
| Posted: Wed Aug 30, 2017 2:01 pm Post subject: |
|
|
Sounds like you're set!
Painting would be a breeze with that compressor,
I would suggest a high power exhaust fan, I could only spray for a few minutes before my "booth" was so hazy I couldn't see straight. |
|
| Back to top |
|
|
Brett Wilkie
Joined: 16 Sep 2012
Posts: 1268
Location: Vancouver British Columbia Canada
|
| Posted: Thu Aug 31, 2017 10:17 am Post subject: |
|
|
It is tempting to try painting but it would mean a fair bit of work creating a booth in the garage, maybe one day but for now it would be easier to just take it to a local paint shop. The Anglia is actually driveable even though it doesn't have glass, fenders, lights or doors so I could sneak/drive it the 2 Km to the paint shop.
The other thing I find is that body shops don't seem to like painting these older cars, one would not even consider it until I told him it was basically stripped of all trim and glass.
_________________
Anglia 100e modified
Prefect 100e stock |
|
| Back to top |
|
|
Langlia
Joined: 14 Dec 2015
Posts: 490
Location: Langley BC
|
| Posted: Thu Aug 31, 2017 11:52 am Post subject: |
|
|
I'm sure you could drive it there haha. Gibson's is more laid back then uptight lower mainland I imagine. How many cops in town?
Weird they do it like that eh, I would think business is business.. what's a paint job cost? |
|
| Back to top |
|
|
Brett Wilkie
Joined: 16 Sep 2012
Posts: 1268
Location: Vancouver British Columbia Canada
|
| Posted: Thu Aug 31, 2017 3:23 pm Post subject: |
|
|
There is an RCMP Detachment very nearby the street that I have to use to get there so the odds are fair of coming across one but I suppose I could tow it that short distance.
He wouldn’t give me a quote for a paint job until he actually looks at the car, he did say though that to do a full repaint on something like a Honda Civic could cost 5 Grand or more, it’s all about time spent. The shop I was talking to is in the process of changing hands and he doesn’t have a full staff yet so would not be able to start such a job at this time. I am going to look around and check out some of the local privateer/painters and certainly I will get more info before I commit to anything.
_________________
Anglia 100e modified
Prefect 100e stock |
|
| Back to top |
|
|
zephyrgary
Joined: 03 Aug 2007
Posts: 821
Location: cave creek,az
|
| Posted: Thu Aug 31, 2017 6:09 pm Post subject: |
|
|
Took my Morris in for paint. They said it would take 8 days. Four months later and it still isn't done. Next week for sure...
_________________
the older i get,the faster i went... |
|
| Back to top |
|
|
Brett Wilkie
Joined: 16 Sep 2012
Posts: 1268
Location: Vancouver British Columbia Canada
|
| Posted: Thu Aug 31, 2017 9:22 pm Post subject: |
|
|
| zephyrgary wrote: | | Took my Morris in for paint. They said it would take 8 days. Four months later and it still isn't done. Next week for sure... |
I hope that you are getting a deep discount for that sort of performance??
_________________
Anglia 100e modified
Prefect 100e stock |
|
| Back to top |
|
|
Langlia
Joined: 14 Dec 2015
Posts: 490
Location: Langley BC
|
| Posted: Fri Sep 01, 2017 8:24 am Post subject: |
|
|
| That's pretty bad. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
