www.EnfoStuff.com Forum Index
Google
www.EnfoStuff.com
Forum for all North American English and European Ford Owners
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


'66 Anglia
Goto page Previous  1, 2, 3, 4  Next
 
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> Readers Rides
View previous topic :: View next topic  
Author Message
Langlia



Joined: 14 Dec 2015
Posts: 356
Location: Langley BC

PostPosted: Fri Sep 22, 2017 11:11 pm    Post subject: Reply with quote

Got the proper seals for the top half of the doors now.. they close.

Replaced both 1/4 Window Seals. What a bitch.

Brakes are done, all bled.

Replaced the clips that hold the felt in the window.

Started running aftermarket 12 circuit wiring harness.

Dave dropped me off a steering wheel.

Glass is back in both doors, they are pretty much done.

Full interior kit from Aldridge arrived a few weeks ago, looks great. Still need headlining to go in, then will start putting glass back in.




Back to top
View user's profile Send private message
Langlia



Joined: 14 Dec 2015
Posts: 356
Location: Langley BC

PostPosted: Fri Sep 29, 2017 8:52 pm    Post subject: Reply with quote




Back to top
View user's profile Send private message
Brett Wilkie



Joined: 16 Sep 2012
Posts: 1102
Location: Vancouver British Columbia Canada

PostPosted: Fri Sep 29, 2017 9:48 pm    Post subject: Reply with quote

The Anglia looks like it's turning out well, a real triumph for you Laughing I hope that you don't spend much time under the car with only those cinder blocks between you and pain?
_________________
Anglia 100e modified
Prefect 100e stock
Back to top
View user's profile Send private message
Langlia



Joined: 14 Dec 2015
Posts: 356
Location: Langley BC

PostPosted: Sat Sep 30, 2017 9:13 am    Post subject: Reply with quote

So witty!

Took me a while to straighten the grille yesterday, had to modify the mounting tabs to pull it nice and tight to the body.

The cinder blocks are insurance. 4 jack stands and the rear tires are on sitting on wheels.
Back to top
View user's profile Send private message
Langlia



Joined: 14 Dec 2015
Posts: 356
Location: Langley BC

PostPosted: Sat Oct 28, 2017 6:39 pm    Post subject: Reply with quote

Shaved the valve cover, painted it. New gasket..

Degreased and painted the gearbox. Steering is in now, The electrical is coming along.. Still wiring up the dash and rear lights and indicators.

Headliner went in today, took the man about 1.5 Hours. Not bad!











Interior will be going in next weekend.
Back to top
View user's profile Send private message
peteleo



Joined: 24 Aug 2008
Posts: 897
Location: San Mateo,California

PostPosted: Sat Oct 28, 2017 7:01 pm    Post subject: Reply with quote

Coming along very nicely. Headliner could be a bitch to put in, at least for me This one looks sharp.
Back to top
View user's profile Send private message Send e-mail
Brett Wilkie



Joined: 16 Sep 2012
Posts: 1102
Location: Vancouver British Columbia Canada

PostPosted: Sat Oct 28, 2017 7:51 pm    Post subject: Reply with quote

It looks good to have the headliner in, I was too lazy to get mine done so I will be going naked.
_________________
Anglia 100e modified
Prefect 100e stock
Back to top
View user's profile Send private message
Brett Wilkie



Joined: 16 Sep 2012
Posts: 1102
Location: Vancouver British Columbia Canada

PostPosted: Sat Oct 28, 2017 8:04 pm    Post subject: Reply with quote

I forgot to say, what are you doing for a slave cylinder?? It might be a good solution to the stock/original item??

_________________
Anglia 100e modified
Prefect 100e stock
Back to top
View user's profile Send private message
Dave C



Joined: 24 Mar 2016
Posts: 81
Location: Pitt Meadows, B.C. Canada

PostPosted: Sun Oct 29, 2017 8:25 am    Post subject: Reply with quote

Coming along very nicely. Headliner looks very good.

Dave.
Back to top
View user's profile Send private message AIM Address
peteleo



Joined: 24 Aug 2008
Posts: 897
Location: San Mateo,California

PostPosted: Sun Oct 29, 2017 8:34 am    Post subject: Reply with quote

On the MK 2 T/C arms use the 105E T/C stabilizer bush casings. They would need to be cut approx. 1/8" from the ends. Place a washer against the castellated nut. There should be only a few threads showing at the end of the stabilizer.





Back to top
View user's profile Send private message Send e-mail
Langlia



Joined: 14 Dec 2015
Posts: 356
Location: Langley BC

PostPosted: Sun Oct 29, 2017 10:44 am    Post subject: Reply with quote

Thanks guys,

It cost $300 to get it done, they came out on their day off.

I'm very happy with the results.

The slave cylinder I have, took it off to paint the gearbox.. as you can see one of the previous owners has modified the gearbox for a different slave.. I'll inspect the other one closer to see what it's all about.

Pete, had another guy on 105Speed mention the bushes as well, thought he was talking about the washers that go on either side but your picture sparked my memory. Going to add to the list. I know exactly where these things are... Smile
Back to top
View user's profile Send private message
peteleo



Joined: 24 Aug 2008
Posts: 897
Location: San Mateo,California

PostPosted: Sun Oct 29, 2017 12:11 pm    Post subject: Reply with quote

Neil, 105speed, mentioned the poly bush kit you can purchase from Milton for 74 pds., but on the hand, you already have the mk2 rubber bushings installed.
So easiest solution would be to use the 105E bush casings which works as a prefect sleeve and spacer. Just be careful not to take too much off the ends.
Start with cutting off 1/16" from both ends. Install and see if you need to grind off more. I finally cut 1/8" from each end.
Back to top
View user's profile Send private message Send e-mail
ctmandu



Joined: 24 Jun 2017
Posts: 12

PostPosted: Mon Oct 30, 2017 5:17 pm    Post subject: Reply with quote

Langlia wrote:
Shaved the valve cover, painted it. New gasket..

Degreased and painted the gearbox. Steering is in now, The electrical is coming along.. Still wiring up the dash and rear lights and indicators.

Headliner went in today, took the man about 1.5 Hours. Not bad!



.


Is there a place to get the black trim that goes above the side windows in this photo for the headliner ?
Back to top
View user's profile Send private message
Langlia



Joined: 14 Dec 2015
Posts: 356
Location: Langley BC

PostPosted: Tue Oct 31, 2017 10:34 am    Post subject: Reply with quote

Hmm.. Don't know anyone that actually sells reproduction ones. Gonna be a pain to track down.

Part #s are

7050956 and 7050957 Not that it makes a big difference.
Parts manual calls them headliner strips
Back to top
View user's profile Send private message
ctmandu



Joined: 24 Jun 2017
Posts: 12

PostPosted: Tue Oct 31, 2017 2:34 pm    Post subject: Reply with quote

ok thank you
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> Readers Rides All times are GMT - 6 Hours
Goto page Previous  1, 2, 3, 4  Next
Page 3 of 4

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group