www.EnfoStuff.com Forum Index
Google
www.EnfoStuff.com
Forum for all North American English and European Ford Owners
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


CL-Ford Cortina and Lotus bell housing to block spacer (CA)

 
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> For Sale
View previous topic :: View next topic  
Author Message
stanchfi
Site Admin


Joined: 15 Mar 2007
Posts: 859
Location: Indiana

PostPosted: Fri Jan 26, 2018 8:51 am    Post subject: CL-Ford Cortina and Lotus bell housing to block spacer (CA) Reply with quote

Ford Cortina and Lotus bell housing to block spacer/dirt shield - $65

These spacers go between the bell housing & block on 60's English Ford Kent engine cars. The early type fits all 1960-66 yr 998, 1200, 1340, 1500, & 1560 Lotus Twin Cam 4 bolt rope seal type crank engines.
The later 6 bolt lip seal crank bell housing spacer fits the 67 1500 6 bolt crank block, 1300 & 1600 XFlow, 6 bolt crank Lotus Twin Cam, and BDA-G engines. If you're doing a Lotus "tall" block build or fitting a XFlow lip seal crank into a rope seal block this is the spacer you'll need. Also have the lower small dust cover that attaches to the lower part of the bell housing with 2 small bolts

Included is some information on converting a heavy MK 2 Cortina driveshaft to a lighter shaft.

Have lots of other 60's English Ford Cortina and Anglia parts. Ph five10 six 5 8 four 2 six 8 M5onezero five four7 1nine four2

Morgan British Escort T-Cam TVR Caterhan 7 Seven Vintage Historic Formula Rally SCCA Road Race Burton Performace Sport Car Cosworth BDA BDG

https://sfbay.craigslist.org/sfc/pts/d/ford-cortina-and-lotus-bell/6472856624.html

-James
Back to top
View user's profile Send private message Visit poster's website AIM Address
Brett Wilkie



Joined: 16 Sep 2012
Posts: 1136
Location: Vancouver British Columbia Canada

PostPosted: Fri Jan 26, 2018 1:18 pm    Post subject: Reply with quote

I have noticed that those have been for sale forever, no wonder, you can buy them new out of the U.K. for a little over 24 Pounds. What are some people thinking?
http://www.burtonpower.com/engine-to-bellhousing-upper-dirt-plate-2000e-08-67-fp653.html
_________________
Anglia 100e modified
Prefect 100e stock
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> For Sale All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group