www.EnfoStuff.com Forum Index
Google
www.EnfoStuff.com
Forum for all North American English and European Ford Owners
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


Zetec swap

 
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> Technical Discussion
View previous topic :: View next topic  
Author Message
dfonseka_



Joined: 31 Aug 2017
Posts: 30

PostPosted: Wed May 09, 2018 12:04 am    Post subject: Zetec swap Reply with quote

I've been thinking about doing a zetec swap on my Mk2 Cortina but don't know much about it. I want something a little more modern with some power along with it and this has been on my mind for a while.

I know it's been done plenty of times before and I have done some research. I've gotten as far as needing to get a new sump, clutch, flywheel, pilot bearing, crank sensor housing etc. I do plan on getting rid of the efi and putting bike carbs and a nodiz ecu to deal with the ignition.

As said above, I've looked at it to be about $2800CAD. I know that a water manifold is needed but I've seen cheaper options. Also an exhaust header is needed.

I've wondered about motor mounts. Will mk1/mk2 escort standard conversion mounts fit? As well as if a new water pump is needed (I know the Silvertop zetec needs a new one to spin the right way round. I don't know about the blacktop). New alternator needed as well?

If anyone has experience with this swap please let me know. I want to know if there's other options to doing things.

Thanks,
Daniel
_________________
'69 Cortina 1600GT
Back to top
View user's profile Send private message Send e-mail
Langlia



Joined: 14 Dec 2015
Posts: 514
Location: Langley BC

PostPosted: Wed May 09, 2018 9:20 am    Post subject: Reply with quote

Retro Ford does Zetec install kits,

http://www.retro-ford.co.uk/shop/catalog/zetec-install-kits-throttle-body-kits

Would like to do it for my Anglia in the future. We will see..
Back to top
View user's profile Send private message
Langlia



Joined: 14 Dec 2015
Posts: 514
Location: Langley BC

PostPosted: Sat May 12, 2018 4:19 pm    Post subject: Reply with quote

Hey found this on eBay today. Everything to make it run
Back to top
View user's profile Send private message
Langlia



Joined: 14 Dec 2015
Posts: 514
Location: Langley BC

PostPosted: Sat May 12, 2018 4:20 pm    Post subject: Reply with quote

https://m.ebay.co.uk/itm/Ford-Zetec-E-37mm-Bike-Carburettor-Deluxe-Kit/331695317199?rmvSB=true&ul_ref=http://rover.ebay.com/rover/1/710-53481-19255-0/1?icep_ff3=2&pub=5574934589&toolid=10001&campid=5336738914&customid=&icep_item=331695317199&ipn=psmain&icep_vectorid=229508&kwid=902099&mtid=824&kw=lg&srcrot=710-53481-19255-0&rvr_id=1528873314716&rvr_ts=566304e21630a86bd645c0a5fff0bcfc&_mwBanner=1&_rdt=1&ul_noapp=true
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> Technical Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group