www.EnfoStuff.com Forum Index
Google
www.EnfoStuff.com
Forum for all North American English and European Ford Owners
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


8HP or 10HP?

 
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> General Discussion
View previous topic :: View next topic  
Author Message
BruceD



Joined: 11 May 2019
Posts: 2
Location: Tampa

PostPosted: Thu Jul 11, 2019 1:04 pm    Post subject: 8HP or 10HP? Reply with quote

I know this topic has been covered before, but reading through the threads, I am still not certain how to visually identify the difference. Much of the discussion is about the difference between a 10HP and the later 100E engine. I'm clear on that. But I don't know how to tell the difference between 8HP and 10HP.

What I have: a 1949 RHD Anglia E494A. The engine is 13 head studs with nuts. The dynamo is top-mounted. The engine appears to be original stock equipment (but who can tell, right?) The vehicle data plate says 'Engine No. Y377878". On the top of the cylinder head is a small data plate that says "23N". On the Passenger side of the block (THE USA PASSENGER SIDE!) is a series of numbers/letters that appears to be "19E 6015AR". There is another small data plate affixed to the bulkhead behind the center of the engine (maybe a chassis or body number) that reads "640/7517". If it helps, the carb is a Zenith 26VF.3"

So, what do I have? 8HP or 10HP? Thanks for all your expertise, and let me know if I can provide any additional information.
Back to top
View user's profile Send private message
peteleo



Joined: 24 Aug 2008
Posts: 1150
Location: San Mateo,California

PostPosted: Thu Jul 11, 2019 6:47 pm    Post subject: Reply with quote

I gathered some info from Dave Turner, Ford Popular & small sidevalves.

E494A Anglia 8hp ( 933cc ) 1948-53. Engine # Y-377878 made in 1949.
between: Jan Y-373551 to July Y-385248 ).

Couldn't find the horse power rating for a 933cc but 28 hp would be close.

Y= 8hp
C=10hp

19E-6015AR = EnFo block part#
Back to top
View user's profile Send private message Send e-mail
zephyrgary



Joined: 03 Aug 2007
Posts: 955
Location: cave creek,az

PostPosted: Thu Jul 11, 2019 7:32 pm    Post subject: Reply with quote

I was just gonna say that... Very Happy
_________________
the older i get,the faster i went...
Back to top
View user's profile Send private message
JAN



Joined: 21 Oct 2007
Posts: 154
Location: Wigan, UK

PostPosted: Fri Jul 12, 2019 1:17 am    Post subject: Reply with quote

19E was the original numeric code for the Model Y.
Back to top
View user's profile Send private message
BruceD



Joined: 11 May 2019
Posts: 2
Location: Tampa

PostPosted: Sun Jul 14, 2019 8:57 am    Post subject: Reply with quote

After I posted the question, I found the Engine Numbers section on Small Ford Spares, and it confirms what everyone says here; namely that a 1949 Anglia with that engine/chassis plate would have an 8HP.

Now, to deepen the mystery a bit, I located an additional set of numbers on the driver's side of the engine (again, driver's side is the USA side). The letters look hand-etched, in a slanting script. They read "R321645". According to the Small Ford Spares website, an "R" in front of the numbers means it is a factory-supplied replacement unit. Since this is NOT the original engine, I can't determine anything from the numbers that are on the car itself. I can only use the numbers on the engine. The Small Ford Spares website provides year-by-year information on the "C" blocks and the "Y" blocks, but not on the "R" blocks.

So it seems to make sense that, depending on when the engine was replaced, it could have been with either an 8HP or a 10HP, right?


In addition to the casting numbers, are there any visual external differences between an 8HP and a 10HP ?
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> General Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group