| View previous topic :: View next topic |
| Author |
Message |
cortinalodi
Joined: 26 Jun 2007
Posts: 158
Location: Lodi calif
|
 Posted: Fri Mar 04, 2011 7:16 pm Post subject: Progress on the new mk2 cortina |
 |
|
Well I finally found a White mk2 that seemed worth spending the time on (no rust)
Hard to believe that someone at some point in its life tried to connect a trailer hitch to the bumper and use the stock bumper to tow with.
After a pull on the frame machine and eight hours of work I think I have it straight again
next is the front fender (30 year old bondo) 
looking good 14 may2011
Last edited by cortinalodi on Sun May 15, 2011 1:14 pm; edited 2 times in total |
|
| Back to top |
|
 |
Ale06
Joined: 23 Oct 2007
Posts: 150
Location: Buenos Aires, Argentina
|
| Posted: Thu Mar 24, 2011 8:40 am Post subject: |
|
|
I hope your project go on.
MK2 are fantastic cars. 
_________________
Eternal life King Taunus!! |
|
| Back to top |
|
|
cortinalodi
Joined: 26 Jun 2007
Posts: 158
Location: Lodi calif
|
| Posted: Tue Apr 05, 2011 8:09 pm Post subject: phase two |
|
|
ok got the fender...............and front valence straight. Now the body is straight, I need to drop the engine/front suspension, pull all the glass/trim and paint it about a weeks worth of work.............be interesting to see how long it takes me. I can stall a bit because I'm installing a Cage and plan on tiying it into the a/b pillars. 5 april 2011
here is the front 20 JUly went with the RALLY LOOK
Last edited by cortinalodi on Thu Jul 21, 2011 9:06 am; edited 2 times in total |
|
| Back to top |
|
|
cortinalodi
Joined: 26 Jun 2007
Posts: 158
Location: Lodi calif
|
| Posted: Wed Apr 06, 2011 8:19 pm Post subject: cage is done |
|
|
I used the old mk2 shell to bend/fit it I hope it slips in nice and easy.
Was thinking about painting it white (body color) but black makes it dissapear
Installed and two days of painting it white........what a pain trying to get at all the angles, I should have painted the roll bar out of the car painted the interior then assembled.lesson learned
The yellow in the momo seat set the mark for the interior
Last edited by cortinalodi on Thu Jul 21, 2011 9:08 am; edited 2 times in total |
|
| Back to top |
|
|
cortinalodi
Joined: 26 Jun 2007
Posts: 158
Location: Lodi calif
|
| Posted: Sat Apr 09, 2011 4:22 pm Post subject: all ready for 2011 race season |
|
|
all finished and ready to race.2011 Sacramento Chap SCCA...........cortina power of course
what a blast............not sure about the hossier tires, I'm thinking the goodyears were faster
new season 2012 new car .........going to try AVON's this year
Last edited by cortinalodi on Sun Mar 04, 2012 10:10 pm; edited 2 times in total |
|
| Back to top |
|
|
cortinalodi
Joined: 26 Jun 2007
Posts: 158
Location: Lodi calif
|
| Posted: Sat Jun 11, 2011 2:09 pm Post subject: mike drouin mk2 cortina |
|
|
the picture does not do the engine bay justice.........it looks great
The Suspension is all Whiteline
SHORT BLOCK IS IN, I USED ARP STUDS FROM JAE
WAITING FOR THE HEAD I DECIDED TO DO IT RIGHT AND THE STAINLESS VALVES ARE A LITTLE SLOW SHOWING
PRETTY SURE IT WILL BE CLOSE TO 10:1 COMPRESSION SO I GUESS IT WILL BE PREMIUM GAS FROM NOW ON
now that fills up the engine bay, I see why they used the over the top air cleaner..........hope this does not rattle on the inner fender well
Last edited by cortinalodi on Mon Jun 27, 2011 10:27 am; edited 5 times in total |
|
| Back to top |
|
|
zephyrgary
Joined: 03 Aug 2007
Posts: 806
Location: cave creek,az
|
| Posted: Sat Jun 11, 2011 3:30 pm Post subject: |
|
|
Great job you are doing there. Keep it up, and thanks for sharing the pics...
_________________
the older i get,the faster i went... |
|
| Back to top |
|
|
cortinalodi
Joined: 26 Jun 2007
Posts: 158
Location: Lodi calif
|
| Posted: Wed Aug 10, 2011 7:14 pm Post subject: last installment |
|
|
this is about done..............still need to add the trim along the bottom, but its time to drive the ------------out of it, and see how much I'm going to need to tweek the suspension...already think it sits to high
Last edited by cortinalodi on Sun Aug 21, 2011 2:48 pm; edited 1 time in total |
|
| Back to top |
|
|
peteleo
Joined: 24 Aug 2008
Posts: 997
Location: San Mateo,California
|
| Posted: Wed Aug 10, 2011 7:34 pm Post subject: |
|
|
| It looks sharp, Mike. Milton will be surprised to see what you've done to it. |
|
| Back to top |
|
|
enfoprefect
Joined: 04 Feb 2009
Posts: 157
Location: Oklahoma
|
| Posted: Thu Aug 11, 2011 8:23 am Post subject: |
|
|
Really looking good. I agree, it sits a bit too high.
_________________
Bayless
1948 Prefect E93A
http://sailok.com/enfoprefect |
|
| Back to top |
|
|
IFHP
Site Admin
Joined: 03 May 2007
Posts: 1525
Location: Olympia, Washington
|
| Posted: Wed Aug 17, 2011 10:50 pm Post subject: |
|
|
Nice work Mike. Thanks for documenting the progress for us.
_________________
European Ford Collector |
|
| Back to top |
|
|
cortinalodi
Joined: 26 Jun 2007
Posts: 158
Location: Lodi calif
|
| Posted: Fri Aug 24, 2012 6:01 pm Post subject: LAST ROUND |
|
|
THIS IS THE FINAL RESULT, IT IS ON LOCORT WHEELS
Last edited by cortinalodi on Wed Aug 29, 2012 10:28 pm; edited 2 times in total |
|
| Back to top |
|
|
Ale06
Joined: 23 Oct 2007
Posts: 150
Location: Buenos Aires, Argentina
|
| Posted: Sun Aug 26, 2012 5:09 am Post subject: |
|
|
Looks really beautiful. Congratulations.
_________________
Eternal life King Taunus!! |
|
| Back to top |
|
|
zephyrgary
Joined: 03 Aug 2007
Posts: 806
Location: cave creek,az
|
| Posted: Thu Aug 30, 2012 2:15 pm Post subject: |
|
|
Lot of editing going on. Did you sell it?
Gary
_________________
the older i get,the faster i went... |
|
| Back to top |
|
|
angliagt
Joined: 11 Jun 2007
Posts: 695
Location: Eureka,California
|
| Posted: Fri Oct 19, 2012 1:33 am Post subject: |
|
|
Mike,
As usuall - meticulis work!
- Doug
_________________
If English Fords were worth a lot of money - I'd be wealthy |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
