| View previous topic :: View next topic |
| Author |
Message |
Canucktina
Joined: 19 Dec 2016
Posts: 70
Location: Langley BC Canada
|
 Posted: Tue Jul 04, 2017 11:48 am Post subject: MK1 Cortina / Locort |
 |
|
Still looking for a MK 1 parts car and / or parts. Drivers side strut complete. Sway bar. Anything Lotus Cortina , I have a very rough but genuine car with many parts missing. B.C. Lower Mainland preferred for a parts car but open minded.
Thanks! |
|
| Back to top |
|
 |
Langlia
Joined: 14 Dec 2015
Posts: 522
Location: Langley BC
|
| Posted: Wed Jul 05, 2017 12:49 pm Post subject: |
|
|
| Pics! |
|
| Back to top |
|
|
peteleo
Joined: 24 Aug 2008
Posts: 1042
Location: San Mateo,California
|
| Posted: Wed Jul 05, 2017 2:25 pm Post subject: |
|
|
| sway bar for a Cortina MK1 or Locort ? |
|
| Back to top |
|
|
Canucktina
Joined: 19 Dec 2016
Posts: 70
Location: Langley BC Canada
|
| Posted: Thu Jul 06, 2017 6:16 pm Post subject: |
|
|
| Trust me Langlia it's a horror. If it wasn't a Locort it would have been scrapped long ago. You can come by one day and see it , I am the person who bought the 3 GT wheels back on that cold day several months ago. Your Anglia is worlds better a project. |
|
| Back to top |
|
|
Canucktina
Joined: 19 Dec 2016
Posts: 70
Location: Langley BC Canada
|
| Posted: Thu Jul 06, 2017 6:24 pm Post subject: |
|
|
Hi peteleo, I think we corresponded a few months back. The sway bar needed is just to get my parts shell back up on wheels. So standard Cortina, could even be bent {within reason} bad threads etc. Unfortunately between shipping and exchange you are probably too far away, and definitely in the wrong country. I need something cheap and near to local.
Locort parts I am willing to more or less spend the going rate, but just to move a shell around the yard cost has to be rock bottom.
Greg |
|
| Back to top |
|
|
Langlia
Joined: 14 Dec 2015
Posts: 522
Location: Langley BC
|
| Posted: Thu Jul 06, 2017 7:09 pm Post subject: |
|
|
| Canucktina wrote: | | Trust me Langlia it's a horror. If it wasn't a Locort it would have been scrapped long ago. You can come by one day and see it , I am the person who bought the 3 GT wheels back on that cold day several months ago. Your Anglia is worlds better a project. |
I do recall, memory still functions quite decent. 
Car is almost out of the paint booth, switched up my reducer formulas and now its laying out like glass. Rest of it gets painted tomorrow. |
|
| Back to top |
|
|
Langlia
Joined: 14 Dec 2015
Posts: 522
Location: Langley BC
|
| Posted: Wed Jul 26, 2017 5:41 pm Post subject: |
|
|
Need one of these?
 |
|
| Back to top |
|
|
Canucktina
Joined: 19 Dec 2016
Posts: 70
Location: Langley BC Canada
|
| Posted: Fri Aug 04, 2017 10:18 am Post subject: |
|
|
Thanks but no. The steering linkage is still there. I need the drivers side strut complete with lower link and the sway bar. Brake stuff unimportant as it's just to make the shell able to roll around the yard.
I have managed to place a heavy duty 4 wheel cart under the shell and move it out of the way. But I would still like to have it properly up on wheels at some point. Once the rain comes back the cart will sink if I try to move it. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
