www.EnfoStuff.com Forum Index
Google
www.EnfoStuff.com
Forum for all North American English and European Ford Owners
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


Slave cylinder i.d.

 
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> Technical Discussion
View previous topic :: View next topic  
Author Message
gjz30075



Joined: 22 Nov 2016
Posts: 7

PostPosted: Sun Dec 11, 2016 6:39 pm    Post subject: Slave cylinder i.d. Reply with quote

Hi all,
I've got this Girling slave cylinder that I THINK, per other sources, goes to
an early 60s Consul. Casting number looks to be 6467376. Really
hard to read. Bore size is 1 inch.
Any ideas?

Back to top
View user's profile Send private message Send e-mail
peteleo



Joined: 24 Aug 2008
Posts: 895
Location: San Mateo,California

PostPosted: Sun Dec 11, 2016 7:26 pm    Post subject: Reply with quote

That fits the MK2 '56 - '62 204E / 206E. I.D. should be 7/8".
Back to top
View user's profile Send private message Send e-mail
gjz30075



Joined: 22 Nov 2016
Posts: 7

PostPosted: Mon Dec 12, 2016 4:10 am    Post subject: Reply with quote

Thanks Peteleo, but the bore size actually measures .995. Taking in
consideration the Harbor Freight calipers I was using, I rounded it to
1 inch. I suppose it possible this has been messed with, seeing that
I have two bleeders in it and not one.
Back to top
View user's profile Send private message Send e-mail
peteleo



Joined: 24 Aug 2008
Posts: 895
Location: San Mateo,California

PostPosted: Mon Dec 12, 2016 11:55 am    Post subject: Reply with quote

You are correct 1' bore. I was thinking the Cortina MK2 is 7/8".
The extra bleed valve could just be used as a plug to prevent moisture from entering. Your picture doesn't show the extended boss were the spring attaches to. I assume it does.

Back to top
View user's profile Send private message Send e-mail
gjz30075



Joined: 22 Nov 2016
Posts: 7

PostPosted: Mon Dec 12, 2016 12:01 pm    Post subject: Reply with quote

This cylinder does NOT have the extended boss for the return spring. Makes
it even more confusing.
Back to top
View user's profile Send private message Send e-mail
gjz30075



Joined: 22 Nov 2016
Posts: 7

PostPosted: Mon Dec 12, 2016 12:04 pm    Post subject: Reply with quote

Another view
Back to top
View user's profile Send private message Send e-mail
peteleo



Joined: 24 Aug 2008
Posts: 895
Location: San Mateo,California

PostPosted: Mon Dec 12, 2016 12:56 pm    Post subject: Reply with quote

Your s/cyl may have come with an attached clamped bracket as this one for the 100E. Girling produced hydralic cyls that were interchangeable for various makes.
6467376(#) there should be one more digit. I have one s/cyl that reads:
64673768.
Back to top
View user's profile Send private message Send e-mail
gjz30075



Joined: 22 Nov 2016
Posts: 7

PostPosted: Mon Dec 12, 2016 1:09 pm    Post subject: Reply with quote

I'm going with an '8' Smile Very hard to make out.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> Technical Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group