www.EnfoStuff.com Forum Index
Google
www.EnfoStuff.com
Forum for all North American English and European Ford Owners
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


2000E Oil seal

 
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> Technical Discussion
View previous topic :: View next topic  
Author Message
Langlia



Joined: 14 Dec 2015
Posts: 542
Location: Langley BC

PostPosted: Fri Jul 20, 2018 5:05 pm    Post subject: 2000E Oil seal Reply with quote

Changed my oil seal today.. really had to fight to get the old one out.

Installed an Anglia 105E one.

As far as I see 2000E seals are compatible with the 105E per Burton's seal..

Had a really tough time getting the prop back in, had to give it a few whacks. Do these seals usually start out that tight?

It does rotate by hand in neutral albeit a little difficult not as free as before, ran it on the jackstands through all gears. Doesn't seem to be any problems?

Thoughts?

Thanks guys
Back to top
View user's profile Send private message
peteleo



Joined: 24 Aug 2008
Posts: 1135
Location: San Mateo,California

PostPosted: Fri Jul 20, 2018 7:46 pm    Post subject: Reply with quote

100E, 105E, Cortina MK1/2, Capri / Pinto 1600 rear tx seals are compatible.
Double lip seal should fit tight on the yoke. Outer lip is meant as a dust shield. New seal won't prevent oil leaking if the T/L shaft bushing is worn though.
Back to top
View user's profile Send private message Send e-mail
Langlia



Joined: 14 Dec 2015
Posts: 542
Location: Langley BC

PostPosted: Sat Jul 21, 2018 8:15 am    Post subject: Reply with quote

Let's hope that's not the case, I've had various gearboxes in and out 4 times. I'm pretty good at it now though.
Back to top
View user's profile Send private message
Langlia



Joined: 14 Dec 2015
Posts: 542
Location: Langley BC

PostPosted: Sat Jul 21, 2018 11:00 am    Post subject: Reply with quote

Check it this morning.. no leaks under the car.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.EnfoStuff.com Forum Index -> Technical Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group