www.EnfoStuff.com

Hey Doug, I've used these two in the past...

Dayco 70654 http://www.rockauto.com/catalog/moreinf ... cc=1196153

or the Goodyear 60764 http://www.rockauto.com/catalog/moreinf ... cc=1196153

These were used on Capris... But may work??

Stainless steel bumpers for Cortina and Escort

http://sgbumperscar.com/products%28FORD%29.htm

I have not dealt with them, but someone on another forum gave a good review...

canadianmk3 wrote:Sorry, Im looking to add a rear sway bar. My goof

Don't understand why you'd want that, but either a 73 or 74 Capri would work...

Unfortunately my little 100e Anglia will be limited to 5.5 inch wide rims on the front and 6 to 6.5 on the rear. That is certanly enough rubber for a car it's size and I probably won't do any track time with it anyway.

a 195/50R15 (22.7" OD)will fit a 5.5" wheel, and a 205/50R15 (23.1 OD)
will ...

Racing Legends - Colin McRae

http://www.youtube.com/watch?v=yx61QAZaTxc

Best laid plans and all that, Rockette had to work today...

Hey Michael, there is an open to all car show in Elma next weekend,

http://www.elmachamber.org/HeatOnTheStreet

there were 4 Euro Fords last year,
Our cars, a young friends XR, and this...

http://i490.photobucket.com/albums/rr265/Bates ...

Yes, haven't decided which car yet, Rockettes XR, or my Capri...

canzus wrote: http://www.quickorgarage.com

Glen Rissberger(sp?) developed the suspension bushings/sway bars for Richard O Kaiser tuned Capris

I talked to Glen yesterday, He no longer has any stock for the Capri, or any other Euro Fords...

http://www.batinc.net

I've got Capri bushings from them, took a while, but I don't remember the shipping being extreme...

You'll need to call...

Another one may be Quickor, I've heard rumors they're still operating...

http://www.quickorgarage.com

Glen Rissberger(sp?) developed the suspension ...

Amazingly enough...

http://www.rockauto.com/catalog/x,carco ... Suspension

You need the inners, outers, and seal?

Timken part numbers are Set 21 for the inner, Set 2 for the outer, and 1192 for the seal.
If you can't get them at NAPA, any bearing supplier should be able to get them...

If nothing else, you're looking at Bean, or Team Blitz...

Those numbers are still good...

http://www.rockauto.com/catalog/x,carco ... type,10392

You are probably going to need a custom R/P, best place to start is Flamingriver...

http://www.flamingriver.com/index.cfm/p ... prd231.htm

They can build a custom for you...

I've always bought quality stock rotors, and quality pads, for my stock applications. With that said, I've been
looking at larger rotors for my '73 Capri with the 302/T5/9" rear end. The closest to a true bolt on it for the '94 to
'97 Volkswagon Passat GLX, with the 2.8L "AAA" engine. It's going to ...

Vented rotors were not available on Capris sold in the US. In England and the Euro countries, the vented
rotors were installed on the 2.8 Injection Capris. These are the rotors that Team Blitz sells. To install them
on a US spec Capri, you'll also need the spacer kit for the calipers, also ...