www.EnfoStuff.com

Thanks very much

I need to no the bore of the carries so I can figure out if I can machine the T9 tower/seal assembly to suit the Anglia/mexico carrier.
dlh98370

Does anyone know what the bore is of an Anglia clutch release bearing holder? And is it the same as 200e/Mexico. Some research indicates that the clutch forks are the same other than the Mexico on seems to be reinforced.
dlh98370

This appears to be the correct starter shape wise but a little short on beanie wennies. Probably need on the order of 1.2KW starter

http://www.ebay.co.uk/itm/Ford-Starter- ... 4d2f14c797

dlh98370

I was planning on using a 135 tooth flywheel on my Zetec Anglia. The flywheel could be either a Escort, Pinto which have to be drilled for larger bolts and I have a 1.6l Zetec flywheel I imported which will work straight out of the box. The Pinto flywheel appears to need the least modification but i...

All,
Is the 1.6l Pinto pre engaged starter compatible with the Mk2 Cortina bell housing? Look like the Cortina bell housing supports both the pre engaged and inertia type and has three mounting bolt holes.
dlh98370

So looking at some magazines from the UK, I see that some claim to have fitted 185/60-13 on 13x6 wheels to a 105e. Can anyone verify this? Seems they might rub on the front struts and the leaf springs.
Dlh98370

I have not seen any announcements for a 2014 event. Is there a meet this year?
dlh98370

To important be in the for sale heading

http://www.ebay.com/itm/Ford-Escort-160 ... ars_Trucks
dlh98370

All,
I need to get a new radiator for my Anglia. The local radiator shop is quoting me $350 for a re-core which in reality is not a bad price but in the end I still have an Anglia radiator. Has any one have any suggestions for a substitute radiator.
dlh98370

All,
I am considering ordering some 13 x6 wheels from the UK for my Anglia. Any recommendations for offset? The choices are ET 13,16 or 23. I am leaning toward ET16.
dlh98370

All, This is a design for a 105e strut brace that I created. I was wondering if there was any interest in this? http://img.photobucket.com/albums/v109/dlh98370/strutbrace.jpg The strut mount need to be waterjetted and there is a number I need to get to to make it worth while. The cost depends on the...

As above,
Thanks
dlh98370

Rebuilt TCA http://img.photobucket.com/albums/v109/dlh98370/anglia/DSCF9602.jpg Components from Ebay UK. The dust boot is from Energy Suspension. Probably fnot the best, but much better than before :) New inner bushings are comming as well ARB bracket bushings. Was thinking about modifying the outer...

I see you can get replacement ball joints. I took mine apart and found the thing full of sludge. After I cleaned them out, the interior of the joint has a lot of rust pits etc. The question is that when you get a new joint, the ball is covered with a cup. Is that cup supposed to slide on the housing...