Anglia 123E (Type 3) transmission output seal
Anglia 123E (Type 3) transmission output seal
I'm looking for a current brand/part number for for the transmission tailshaft oil seal. This is a 123E gearbox (1200cc Anglia), I think they are generally referred to as Type 3. This is a box I got from an EnfoStuff member, and I want to replace the seal while it's out on the bench, just in case it's old. Also, can it be removed from the outside? The factory manual shows a special tool.
thank you,
Carl K.
[/img]
-
- Posts: 1829
- Joined: Sun Sep 16, 2012 12:42 pm
- Location: Vancouver British Columbia Canada
Hi Carl, the seals can still be had, maybe even locally but I have bought them in the past on Ebay. Here is some examples from the U.K.
http://www.ebay.ca/itm/Genuine-Transmis ... 485092ced0
your trans tail seal is I THINK the same as a 2000e box
http://www.ebay.co.uk/itm/Ford-Cortina- ... 19d80d1d4d
When you pop the seal out (no special tools required) you should inspect the bushing in the tail housing behind it although I don't have any specs for that??
http://www.ebay.ca/itm/Genuine-Transmis ... 485092ced0
your trans tail seal is I THINK the same as a 2000e box
http://www.ebay.co.uk/itm/Ford-Cortina- ... 19d80d1d4d
When you pop the seal out (no special tools required) you should inspect the bushing in the tail housing behind it although I don't have any specs for that??
Anglia 100e modified
Prefect 100e stock
Prefect 100e stock
transmission back in!
Brett-
I found a NOS seal on eBay. The Payen part number is NA167. It went right in from the outside. Switched transmissions and also had a chance to install a Speedograph remote shifter. Goodbye "magic wand"!
Carl
-
- Posts: 1829
- Joined: Sun Sep 16, 2012 12:42 pm
- Location: Vancouver British Columbia Canada