Brake MC
Brake MC
My brake MC is all but destroyed inside the bore! Took me forever to get the piston out and the bore is all scratched and pitted.
Is there a brake MC from another car I could use? MG,Triumph,...?
I did find an MC from England listed as a big bore vs. 5/8" standard bore. Pit has a plastic res. Would this work. My MKI is a GT with front disks so I would think it would be fine.
Thanks!
Is there a brake MC from another car I could use? MG,Triumph,...?
I did find an MC from England listed as a big bore vs. 5/8" standard bore. Pit has a plastic res. Would this work. My MKI is a GT with front disks so I would think it would be fine.
Thanks!
-
- Posts: 1829
- Joined: Sun Sep 16, 2012 12:42 pm
- Location: Vancouver British Columbia Canada
Before you buy anything check out Wilwood, they have lots of stuff that fit our cars, same fitting as Girling stuff.
http://www.wilwood.com/MasterCylinders/ ... nding.aspx
http://www.wilwood.com/MasterCylinders/ ... nding.aspx
Anglia 100e modified
Prefect 100e stock
Prefect 100e stock
-
- Posts: 1242
- Joined: Fri Aug 03, 2007 6:55 pm
- Location: cave creek,az
I get all my brake stuff from www.powertrackbrakes.co.uk in England. They are awesome.
Gary
Gary
the older i get,the faster i went...
-
- Posts: 185
- Joined: Wed Feb 04, 2009 10:24 pm
- Location: Oklahoma City
- Contact:
Contact WhitePost Restorations, http://www.whitepost.com, to have it bored and brass sleeved. It will last forever. I have had several done and the work is excellent.
-
- Posts: 1829
- Joined: Sun Sep 16, 2012 12:42 pm
- Location: Vancouver British Columbia Canada
If your still looking check this out.
http://www.ebay.com/itm/Ford-Cortina-04 ... 98&vxp=mtr
One new old stock Girling brand brake master cylinder, part number 6406 8556. This fits:
•Ford Cortina 04/1965 - 10/1966
http://www.ebay.com/itm/Ford-Cortina-04 ... 98&vxp=mtr
One new old stock Girling brand brake master cylinder, part number 6406 8556. This fits:
•Ford Cortina 04/1965 - 10/1966
Anglia 100e modified
Prefect 100e stock
Prefect 100e stock
-
- Posts: 1242
- Joined: Fri Aug 03, 2007 6:55 pm
- Location: cave creek,az
emmodg....I used the wilwood 5/8" bore...Speedway part number 835 260 2636. The outlet threads are correct too. I had to remove the supplied pushrod and put the stock pushrod in its place.
I used 5/8" because that was on the car and it is my understanding that the 5/8" is correct for the 100E. Brakes work great !!
I used 5/8" because that was on the car and it is my understanding that the 5/8" is correct for the 100E. Brakes work great !!