Does anyone know what the bore is of an Anglia clutch release bearing holder? And is it the same as 200e/Mexico. Some research indicates that the clutch forks are the same other than the Mexico on seems to be reinforced.
dlh98370
anglia clutch releas bearing holder
Just measured the T/O bearing s retainers:
Anglia 105E retainer collar dia. ( where the bearing sits on ) 1.368"
Which uses a flat surface T/O bearing.
Cortina MK2 1600 retainer collar dia 1.508". Semi-round T/O bearing.
I believe the Mexico uses the 105E bell housing and modified 105E fork.
The 105E and Mexico use the same T/O bearing. Don't know if they share the same carrier.
Anglia 105E retainer collar dia. ( where the bearing sits on ) 1.368"
Which uses a flat surface T/O bearing.
Cortina MK2 1600 retainer collar dia 1.508". Semi-round T/O bearing.
I believe the Mexico uses the 105E bell housing and modified 105E fork.
The 105E and Mexico use the same T/O bearing. Don't know if they share the same carrier.