Used parts source?

Post technical questions here.
Post Reply
Elan
Posts: 40
Joined: Wed Apr 03, 2019 12:17 pm
Location: Florida

Used parts source?

Post by Elan »

So...My main jet column cracked and both Small Ford Spares and KIPS only do rebuilds of your carb. Anyone know where I can find a carburetor for my 100e?
Faster faster
peteleo
Posts: 1332
Joined: Sun Aug 24, 2008 11:57 am
Location: San Mateo,California

Post by peteleo »

P28ZIC-2 Solex . 2 choke screws and throttle lever missing. The carb base mounting holes have been elongated to fit the 105E inlet manifold otherwise in good condition.

ImageImageImage
Elan
Posts: 40
Joined: Wed Apr 03, 2019 12:17 pm
Location: Florida

Solex Please

Post by Elan »

Hey Peteleo, Do you know what the difference is between the B 28 and the B26 is?
Faster faster
peteleo
Posts: 1332
Joined: Sun Aug 24, 2008 11:57 am
Location: San Mateo,California

Post by peteleo »

B26 meant for the 100E and 307E low compression. B28 Triumph Herald 948cc
B28 can be used on a 100E engine or 105E with the base holes elongated.
They are not quite the same carbs but some parts are interchangeable.

There is a B26 on ebay:

https://www.ebay.com/itm/English-Ford-E ... 1438.l2649
Elan
Posts: 40
Joined: Wed Apr 03, 2019 12:17 pm
Location: Florida

Thanks Peteleo!

Post by Elan »

Hey thanks a lot Peteleo! I got the carb. and a speedo from the same guy on ebay for $100.
Faster faster
Post Reply