Used parts source?
Posted: Thu May 23, 2019 2:33 pm
So...My main jet column cracked and both Small Ford Spares and KIPS only do rebuilds of your carb. Anyone know where I can find a carburetor for my 100e?
www.EnfoStuff.com
Forum for all North American English and European Ford Owners
https://www.enfostuff.com/forum2/
Used parts source?
Page 1 of 1
Posted: Thu May 23, 2019 2:55 pm
P28ZIC-2 Solex . 2 choke screws and throttle lever missing. The carb base mounting holes have been elongated to fit the 105E inlet manifold otherwise in good condition.
Solex Please
Posted: Fri May 24, 2019 7:52 pm
Hey Peteleo, Do you know what the difference is between the B 28 and the B26 is?
Posted: Fri May 24, 2019 8:59 pm
B26 meant for the 100E and 307E low compression. B28 Triumph Herald 948cc
B28 can be used on a 100E engine or 105E with the base holes elongated.
They are not quite the same carbs but some parts are interchangeable.
There is a B26 on ebay:
https://www.ebay.com/itm/English-Ford-E ... 1438.l2649
B28 can be used on a 100E engine or 105E with the base holes elongated.
They are not quite the same carbs but some parts are interchangeable.
There is a B26 on ebay:
https://www.ebay.com/itm/English-Ford-E ... 1438.l2649
Thanks Peteleo!
Posted: Sat May 25, 2019 6:11 pm
Hey thanks a lot Peteleo! I got the carb. and a speedo from the same guy on ebay for $100.