Page 1 of 1
Solex Blues Part two
Posted: Tue Jul 16, 2019 9:58 am
by Elan
So I "rebuilt" my "new" carb. 3 times and it still won't idle. So I want to get another one. Anyone know where I can find a salvage yard that would have old 100e s? Or any other suggestions.
Posted: Tue Jul 16, 2019 11:03 am
by Brett Wilkie
Are you 100% sure that you don't have some kind of vacuum leak, I know that it sounds obvious but have you tried running it with the wiper vacuum take-off removed and blocked?
I have heard that some of the early VW Beetle engines used a similar carb but I have no idea if they interchange?
Good idea
Posted: Tue Jul 16, 2019 11:22 am
by Elan
Great idea Brett. I'll try it. I did disconnect the vacuum reservoir and connected the vacuum gauge to the hose to adjust the fuel mix screw. The needle bounced a lot about 5 points and I got very little response tuning the mix screw. Thanks Brett
Posted: Tue Jul 16, 2019 11:35 am
by JAN
You should also, if you haven't already, check that the base is truly flat; they tend to bow with being tightened down on to the yielding material of the gasket. Also check that there is no play in the throttle spindle bushes, another common cause of air leaks which doesn't help the idling mixture.
OK Thanks
Posted: Tue Jul 16, 2019 11:44 am
by Elan
Thanks a lot Jan , will do