Mk1 Cortina Lower Ball Joints
-
- Posts: 1829
- Joined: Sun Sep 16, 2012 12:42 pm
- Location: Vancouver British Columbia Canada
Mk1 Cortina Lower Ball Joints
Anyone know a decent supplier of Cortina Mk1 ball joints or repair kits?
Anglia 100e modified
Prefect 100e stock
Prefect 100e stock
Re: Mk1 Cortina Lower Ball Joints
I would always try purchasing in the States first. Ken at Dave Bean or ebay. Yesterford, Au has kits @ $75AU ea. Newfordspares: Ball joint set 204 pds.
Graeme at EnFord spares NZ. Prices vary considerably.
Graeme at EnFord spares NZ. Prices vary considerably.
-
- Posts: 1829
- Joined: Sun Sep 16, 2012 12:42 pm
- Location: Vancouver British Columbia Canada
Re: Mk1 Cortina Lower Ball Joints
Thank you. I did a bit of looking on the internet and did see a fair range of prices, I didn't think of Dave Bean though, I wonder if he stocks such a thing?
Anglia 100e modified
Prefect 100e stock
Prefect 100e stock
-
- Posts: 364
- Joined: Thu Dec 05, 2013 7:19 pm
- Location: Saskatoon, Saskatchewan
Re: Mk1 Cortina Lower Ball Joints
I got mine from MK1 Cortina owners club.
Life isn't complete until you have a pair of twin cams in the garage...
-
- Posts: 1242
- Joined: Fri Aug 03, 2007 6:55 pm
- Location: cave creek,az
Re: Mk1 Cortina Lower Ball Joints
I have bought stuff from Graeme and Yesterford. Both were good.
Gary in AZ
Gary in AZ
the older i get,the faster i went...
-
- Posts: 1829
- Joined: Sun Sep 16, 2012 12:42 pm
- Location: Vancouver British Columbia Canada
Re: Mk1 Cortina Lower Ball Joints
So did you have to join the club or do they sell to anyone? I don't actually have a Mk1 Cortina , just the struts and track arms. I might experiment with them on the front of a 100e Anglia.
Anglia 100e modified
Prefect 100e stock
Prefect 100e stock
-
- Posts: 1829
- Joined: Sun Sep 16, 2012 12:42 pm
- Location: Vancouver British Columbia Canada
Re: Mk1 Cortina Lower Ball Joints
I do see that they have them, I may just need the kits but I have to disassemble and wash the bits first before I know.zephyrgary wrote: ↑Mon Oct 19, 2020 1:32 pm I have bought stuff from Graeme and Yesterford. Both were good.
Gary in AZ
Ball Joint - Lower Assembly (Steering Arm) each $145.00 ——
Ball Joint Repair Kit each $75.00
Anglia 100e modified
Prefect 100e stock
Prefect 100e stock
-
- Posts: 364
- Joined: Thu Dec 05, 2013 7:19 pm
- Location: Saskatoon, Saskatchewan
Re: Mk1 Cortina Lower Ball Joints
So did you have to join the club or do they sell to anyone? I don't actually have a Mk1 Cortina , just the struts and track arms. I might experiment with them on the front of a 100e Anglia.
Brett. You have to be a member but if you need them I could always order them and get them sent to you. Let me know, won't be a problem.
Brett. You have to be a member but if you need them I could always order them and get them sent to you. Let me know, won't be a problem.
Life isn't complete until you have a pair of twin cams in the garage...
-
- Posts: 364
- Joined: Thu Dec 05, 2013 7:19 pm
- Location: Saskatoon, Saskatchewan
Re: Mk1 Cortina Lower Ball Joints
Just checked Brett 21.60 GBP plus shipping and that's for a pair. That's for tie rod ends. Bottom ball joint kits 53.40 GBP. Not sure which one's you're after.
Life isn't complete until you have a pair of twin cams in the garage...
-
- Posts: 1829
- Joined: Sun Sep 16, 2012 12:42 pm
- Location: Vancouver British Columbia Canada
Re: Mk1 Cortina Lower Ball Joints
It is actually the main ball joint at the base of the strut, it is incorporated with the steering arm as in the photos.
The thing with the Mk1 Cortina strut is that it is different from the Mk2 as well as the 105e and 100e otherwise I could just use the track arm/ball joint assembly from one of the Non-Mk1 cars depending on the camber I am looking for.
I already have a good setup on one of my 100e vehicles using Mk2 Cortina struts and 100e arms but that took these top mounts with a lot of offset to compensate for the 9 degree Mk2 spindle angle.
Anyway, too much info but you get the idea.
The thing with the Mk1 Cortina strut is that it is different from the Mk2 as well as the 105e and 100e otherwise I could just use the track arm/ball joint assembly from one of the Non-Mk1 cars depending on the camber I am looking for.
I already have a good setup on one of my 100e vehicles using Mk2 Cortina struts and 100e arms but that took these top mounts with a lot of offset to compensate for the 9 degree Mk2 spindle angle.
Anyway, too much info but you get the idea.
Anglia 100e modified
Prefect 100e stock
Prefect 100e stock
-
- Posts: 364
- Joined: Thu Dec 05, 2013 7:19 pm
- Location: Saskatoon, Saskatchewan
Re: Mk1 Cortina Lower Ball Joints
Ok so they're 53.40 or 54.60 for the Lotus ones from the club. Nice pictures.
Life isn't complete until you have a pair of twin cams in the garage...
-
- Posts: 1829
- Joined: Sun Sep 16, 2012 12:42 pm
- Location: Vancouver British Columbia Canada
Re: Mk1 Cortina Lower Ball Joints
I was looking on their website and they do have a lot of good spares to offer, there are a number of things there that I might find myself needing in time. These are the actual NON Lotus kits that I will likely need if I go ahead with the strut rebuild. I might rebuild the ball joint assembly as well as the strut anyway, I would do it with these Burton coilover kits and a set of NOS Koni shocks that I have here. If I don't use them I may be able to sell them off?1970 cortina GT wrote: ↑Tue Oct 20, 2020 2:52 pm Ok so they're 53.40 or 54.60 for the Lotus ones from the club. Nice pictures.
I might be in need of your assistance here.
Anglia 100e modified
Prefect 100e stock
Prefect 100e stock
-
- Posts: 364
- Joined: Thu Dec 05, 2013 7:19 pm
- Location: Saskatoon, Saskatchewan
Re: Mk1 Cortina Lower Ball Joints
Sounds good, would be glad to assist, just let me know.
Life isn't complete until you have a pair of twin cams in the garage...
-
- Posts: 1829
- Joined: Sun Sep 16, 2012 12:42 pm
- Location: Vancouver British Columbia Canada
Re: Mk1 Cortina Lower Ball Joints
Thank you, I will have a closer look at all the bits, could be some bushings needed too. I will be in touch.1970 cortina GT wrote: ↑Wed Oct 21, 2020 7:45 am Sounds good, would be glad to assist, just let me know.
Anglia 100e modified
Prefect 100e stock
Prefect 100e stock
-
- Posts: 1829
- Joined: Sun Sep 16, 2012 12:42 pm
- Location: Vancouver British Columbia Canada
Re: Mk1 Cortina Lower Ball Joints
I sent you an email through this site but I am not confident it worked, did you get it?
Anglia 100e modified
Prefect 100e stock
Prefect 100e stock